4.0 ELECTRONIC PROGRAMME GUIDE (EPG)
EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and offers
information on broadcasted programmes. You can access it in digital mode by pressing
EPG
on the
remote control. Press
EPG
to bring up the EPG interface. Use
pq
to select a programme. Use
pq
and
then
t
u
to select channel you like to see EPG overview. Use
pq
to select a programme. Press
to
stop and return to viewing modes.
Then press the
BUTTONS
for entering the required settings.
INFO
Access extra info of programme
YELLOW
Program Information 24+ hours.
GREEN
Program Information 24- hours.
5.0 NETWORK CONNECTION
Your TV can be connected to your home network in two ways:
Wired, using the RJ-45 (LAN) connector on the back panel.
Wireless, using the internal wireless and your home wireless network.
NOTE:
To access the Internet, you must subscribe to a highspeed broadband
Internet service with your Internet service provider.
NOTE:
Instructions below are just the usual ways to connect your TV to a wired or
wireless network. The connection method may differ depending on your
actual network configuration. If you have any questions about your home
network, please refer to your Internet service provider.
5.1 Connecting to a wired network
Fig. 6a
NOTE:
The graphics are for representation only.
To connect to a wired network
1. Ensure you have:
An Ethernet cable long enough to reach your TV
A router or modem with an available Ethernet port
A highspeed Internet connection
2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV.
3. Use the
Network Configuration
menu to configure the TV.
8
