background image

2.  Back up all of the data in the USB storage device in case data is lost due to an unexpected 

accident. STRONG does not assume any liability for the losses by misuse or malfunction. Data 
backup is consumer's responsibility.

3.  For large file sizes, the loading speed may be slightly longer.
4.  The recognition speed of a USB storage device may depend on each device.
5.  When connecting or disconnecting the USB storage device, make sure the TV is not in USB 

mode, otherwise the USB storage device or the files stored in it may be damaged.

6.  Please use only a USB storage device which is formatted in FAT16, FAT32, NTFS (playback only) 

file system provided with the Windows operating system. In case of a storage device formatted 
as a different utility programme which is not supported by Windows, it may not be recognized.

7.  When using a USB Hard Disk Drive, which is not powered independently, ensure its power does 

not exceed 500 mA. Otherwise the TV system will change into standby mode, and you must pull 
out the USB Hard Disk and restart the TV system. 

8.  An "Unsupported File" message will be displayed if the file format is unsupported or the file is 

corrupted.

9.  FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
10. This TV may not support some multimedia files changed and upgraded as the change of the 

encoding format or other technical aspects advances.

8.2 USB menu

You can view movies, music, photo or browser files from your USB storage devices. Connect a USB 
storage device to the USB input terminal and select the types of media on the Multimedia page: 

Movie

Music

Photo

 and 

text

. Press 

OK

 or 

u

, the screen will show the connected USB device, press 

OK

 again to 

view the file folders and files. Press 

pq

 or 

t

 

u

 to select a folder, press 

OK

 to open the folder and select 

the files. Highlight the one you want to play or watch or press directly 

u

 

2

 to start playing directly. Press 

3

 to stop playing and return to upper lever folder. Continuously press 

RETURN

 to go back to upper level 

folder. Repeat again to select and play another media type.

NOTE:

 

 By choosing one of the three media types, for example 

Movie

, the folders 

inside will display only video files and no other formats.

8.2.1 Play movies

Fig. 7

During playback, press 

INFO

 to display/exit the menu bar (

Fig. 7

). Press the 

USB control buttons

 on the 

remote control to do relevant operations.

Pause/Stop/Prev./Next

 

 Press 

u

 

2

 to play or pause the playback. Press 

3

 to stop playing. Press 

7 8

 to play the previous or the next video file. Press 

INFO

 and use 

t

 

u

 to 

highlight the corresponding icon on the control bar, then press 

OK

. The TV 

will response accordingly.

Fast Reverse/Fast Forward

   Press and hold 

5 6

 for seconds to draw the playing progress as your desire, 

then press 

u

 

2

 to start the playing from the new position.

Mode

 

 Highlight the corresponding icon and press 

OK

 to switch to another play 

mode.

Sound

 

 Highlight the corresponding icon and press 

OK

 to select the sound mode.

Info

 

 Highlight the corresponding icon and press 

OK

 to view the information of the 

playing video.

13

English

Summary of Contents for SRT 32HB5203






















Reviews: