3. Close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insufficient which affects the use range, you should replace it with
a new battery. Remove the batteries from the remote-control unit if you do not intend to use it
for a long time
3. Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.
2.6 Using the remote control
Use the remote control by pointing it towards the remote sensor. Items between the remote
control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit
by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not
work. If so, please change the lighting or TV's position, or operate the remote control closer to
the remote sensor.
3.0 FIRST TIME INSTALLATION
After all connections have been made properly, switch your TV on. The language selection will appear on
the screen. Use
pq
to select the
Language
of your preference and select your country, confirm with
OK
.
Then select your Country/Region and confirm your selection with OK or arrow right button. The
Terms
and Conditions, Privacy Notice, Cookie Notice
will appear, please read it and confirm with
I agree
.
Now you can confirm your location. Here you can choose where you are using the TV. For normal use,
you can use the
Home
setting. After you selected the setting which fits for your usage, confirm with
OK
.
The installation will proceed to the
Network SetUp
screen, choose between “Wireless”, “Wired” or “I do not
have a network connection” and confirm with
OK
. Follow the steps that follow to successfully complete
your chosen option. If you choose "I do not have a network connection" you will be forwarded to the one
screen further.
On the following screen, you can select the
TV channel Installation
. Choose the one option you like to
use and follow the next instructions.
If you have chosen
Continue
option, you will be able to install channels. Select which installation you want
to use: (Antenna, Cable or Satellite)
Digital
to receive digital terrestrial broadcasts
Analogue
for analogue terrestrial reception or both to perform
the installation of both choices simultaneously. Other tuners can be set-up if you choose for “I don't want to
scan”. If you have chosen this last option, you will now have the possibility to scan Cable tuner.
Select
Digital
or
Analogue
option to scan cable broadcasts or choose “I don't want to scan”. If you have
chosen this last option, you will now have the possibility to scan Satellite tuner.
Follow the steps that apply to your home installation to receive digital satellite broadcasts (if you have a
satellite dish).
Follow the steps that appear on your TV screen to complete the installation of your TV and enjoy.
7
English
