Problem
Possible cause and solution
Normal picture, no
sound
1. Press the volume up button to increase the volume level.
2. Audio is muted, press
!
to restore the sound.
3. If external devices are used to loop the sound through, make sure
to select correct sources and correct sound mode, for details also
check advices in User Manuals from connected devices
4. Maybe a channel w/o audio is tuned to (demo) or the programme
is not transmitting audio signals or there is some other
transmission interference/failure.
Playback of video is
causing picture freeze/
macro blocks or similar
distortion, especially on
HD content.
Read/write speed of your USB device could be too low. Make sure to use a
USB storage device with sufficient speed and space. Pen drives (USB sticks)
may not support sufficient speed.
The remote control does
not work
1. hange the batteries. If you're using rechargable ones take care to
use such with low self-discharge
2. The batteries are not installed correctly or the types have been
mixed
3. IR Sensor is blocked or maybe interfered from bright light
The TV switches off after
a certain time
Switch ON the TV and check settings for automatic STBY function, by
default the TV switches OFF after 4 hours to fulfil European low power
regulations and help you to save energy.
NOTE:
If the problem persists after these solutions, please contact your local
support centre or send a support mail via our website www.strong.tv.
8.0 SPECIFICATIONS
Audio
Audio Output:
5 W + 5 W
Video
Channel coverage:
DVB-T2: 174 MHz-230 MHz; 470 MHz-860 MHz
DVB-C: 50-858 MHz
DVB-S2: 950 MHz-2150 MHz
System:
DTV: DVB-T2, DVB-S2, DVB-C (Support H.265 L.4.1)
ATV: PAL/SECAM (BG/DK/1)
AV: PAL, NTSC, SECAM
Connectors
1x ANTENNA IN
1x SATELLITE IN
1x COMMONINTERFACE (CI+)
2x HDMI
2x USB
1x S/PDIF (optical)
1x AV IN (Jack 3.5mm)
1x HEADPHONES (Jack 3.5mm)
17
English
