5.4 Installation
Press
MENU
to display the main menu. Press
pq
to select
Search
in the main menu. Press
OK
it access
and press
pq
to select the option you wish to adjust in the
Search
menu. Press
OK
to enter and to
adjust.
Below items depend if they are available of select input source. Use
SOURCE
to select other source.
5.4.1 Auto Tuning
Press
pq
to select
Auto Tuning
, select the
Region Tune Type
and proceed with
OK
. If you use
DTV
as
input source, you can switch between
DVB-T
Terrestrial and
DVB-C
Cable. If you use
Satellite
as input
source, you can select the satellite you dish are pointing to and how want to search for.
5.4.2 Dish Setup (Satellite)
The
Dish Setup
menu allow you to set you satellite and belonging settings as DiSEqC port(s) and LNB
type. Also you can select motor support and GoTo-X function. Afterwards you may start the
Auto Tuning
or
Manual Tuning
by selecting with
EPG
button the wanted transponder.
5.4.3 DTV Manual Tuning (in DVB-T mode only)
Search and store programmes manually. Press
pq
to select
DTV Manual Tuning
. Then press
OK
to enter
the sub-menu.
Press
t u
to select a
Channel No.
, and then press
OK
to start the search. The search stops when a
programme is found and this programme will be stored in the current channel position. If you want to
stop the search, press
MENU
.
5.4.4 ATV Manual Tuning (in DVB-C mode only)
First select the source type of ATV. Then in the
Installation
menu, select
ATV Manual Tuning
and press
OK
to access. Highlight and press
pq
to select
Current CH 1
(maybe other number),
Sound System
and
Channel No.
. Then select
Search
and press
OK
to start the search. Press
u
for the unit to search towards
higher frequency. Press
t
for the unit to search towards lower frequency. The search stops when a
programme is found and this programme will be stored in the current channel position. If you want to
stop the search, press
MENU
.
Current CH
Set the channel number
Colour System
Select the colour system (Available: AUTO, PAL, SECAM)
Sound System
Select the Sound system
Fine-Tune
Adjust the frequency of the channel
Search
Start the channel search
5.4.5 Channel extra settings
Programme Edit
Edit the programmes. You can press the
COLOUR BUTTONS
on the remote
control to skip programmes, rename and delete programmes or move
programmes, and add programmes to the favourite list by pressing
FAV
.
NOTE:
Some regions are using automatically channel sorting and numbering
(LCN). Which make renumbering of channels by sorting and deleting of
channel list not possible. This will auto selected by country selection.
11
English
