background image

Crypted

 

 Select 

FTA Channels

 to search Free-To-Air channels only or 

All Channels

 to 

search FTA and encrypted channels

Press 

pq t u

 to highlight the country that you want to install, then press 

OK

 to start searching.

If all went well with auto channel installation, your TV will start to play on first channel.
We hope you will enjoy it for many years.

4.0 ELECTRONIC PROGRAMME GUIDE (EPG)

EPG stands for Digital Electronic Programme Guide. It is supplied by the programme providers and 
offers information on broadcasted programmes. You can access it in digital mode by pressing 

EPG

 on 

the remote control. Press 

EPG

 to bring up the EPG interface. Use 

pq

 to select a programme. Use 

t u

to select an event from one channel. Press 

INFO

 to see more details from selected event. If you like this 

event and want to set a reminder. Just press 

OK

 or 

GREEN

 button and reminder is set. You can set even 

Timer for this event 1 x time/Daily/Weekly/Always just be repeating this button. This Timer overview is in 
menu to find under name 

Schedule List

.

Then press the 

COLOUR BUTTONS

 for entering the required settings.

GREEN

 

Set reminder or timer for event

YELLOW

 

Previous day EPG overview

BLUE

 

Next day EPG overview

5.0 MENU SETTINGS

Below items depend if they are available of select input source. Use 

SOURCE

 button to select other input 

source. The selections under this button are, Satellite, DTV, ATV, AV, HDMI 1, HDMI 2 and Media.

5.1 Menu control (DTV mode)

Press 

MENU

 to enter the main menu. Press 

t u

 to select an item. Press 

pq

 and 

OK

 to select the 

submenus. Press 

MENU

 to exit the item.

5.2 Picture menu

Picture Mode

 

 Select the automatic picture control mode. Available choices are 

Dynamic, 

Standard, Mild

 and 

Personal

.

Colour Temperature

 

 Select the overall colour tone of the picture. Available choices are 

Cool, 

Normal

 and 

Warm

.

Noise Reduction

 

 Eliminates noise in the picture. Available choices are 

Off, Low, Middle, High 

and 

 Default

.

Aspect Ratio

 

 Select the aspect ratio (display proportions) according to your video signal 
type or preference. Available choices are 

Auto, 4:3,16:9, Zoom1

 and 

Zoom2

Note

: Some options may not be available under some sources.

In the 

Personal

 mode, settings can be changed for 

Brightness, Contrast, Colour

 and 

Sharpness

.

5.2.1 Contrast/Brightness/Colour Tint/Sharpness

If 

Picture Mode

 is set to 

Personal

 you are able to change the following settings

Press 

pq

 to select an option, then press 

t u

 to adjust.

9

English

Summary of Contents for SRT 32HB3003























Reviews: