Strong PRIMA III, User Manual

Page: 12 / 17

PART 1 • English
9
English
Manual Scan
If any channel is missing after auto search, or you want to add newly launched channels, you can use Manual Scan to scan the
desired channels. To manually search the target channel, you must know its parameters, e.g., the channel number. After the
channel is found, it is appended to the current channel list.
1. Enter the Manual Scan menu via Main Menu > Installation .
2. Specify the appropriate channel number in the Channel No field by pressing
t
/
u
keys. Upon your
selection, the frequency and bandwidth values are changed accordingly. Use Numeric buttons to enter a
specific frequency.
3. Select OK to start manual search. (Scr. 27)
4. If no signal is found, a message indicating no signal will appear. Otherwise scanned channel will be saved
and appended to the current channel list.
10.0 TV SETUP
10.1 TV Format
This option allows you to select the aspect ratio of the video output. If you are using normal 4:3 TV, it is OK to view the
regular 4:3 content being broadcasted. But occasionally broadcasters transmit widescreen content; in this situation, you
can choose how to display it in a conventional TV set.
4:3 LB (Letterbox) For conventional 4:3 TV. The full width of widescreen content is displayed on a normal TV with black
bars above and below the picture. (Scr. 28)
4:3 PS (Pan & Scan) For conventional 4:3 TV. It crops the left and right edges of a widescreen content to fit a normal TV.
(Scr. 29)
16:9PB If you are using a wide screen TV, select this option or select 16:9 Auto to see when content is
switched to 4:3.
10.2 TV Mode
This option allows you to select your TV system among PAL , NTSC and Auto . (Scr. 30)
10.3 OSD Transparency & Banner Display Time
This options you can adjust according your wishes.
10.4 Video Output
Set the video mode as CVBS or RGB .
10.5 Video Enhancement
This options you can adjust according your wishes.
11.0 PASSWORD
This feature allows you to prevent children or unauthorized people from access to your settings or watching channels.
1. Go to Main Menu > Password . First you will need to enter PIN as prompted to use the parental control
menu. The default PIN is 0000
2. After correct PIN input, the following options are provided: (Scr. 31)
Menu Lock : Allows you to lock important setting menus.
Channel Lock : Allows you to switch ON or OFF the channel lock for desired channel (s). When set to ON , all the
channels with padlock symbol will be locked (provided that you have set in TV-List). (Scr. 21)
Censorship Lock : If on a certain channel is broadcasted a parental rating for example 12 years, then the movie will be
locked with Password.
Change Password : Allows you to change the PIN. A PIN can be entered in 4 digits. To change the PIN, enter the old,
new PIN in the provided fields. After pressing OK , a message indicating PIN Code Changed will
appear.
NOTE : To activate the channel lock feature, Channel Lock must be set to YES . If you want to lock particular channels while
keeping other channels unlocked, use TV List table to make the settings.