PART 1 • English
8
8.8 Searching for a Channel
1. Select the
Search sign
(below channel list) with the channel
t
/
u
keys than press
OK
and keypad will appear
to insert channel name you're searching for.
8.9 Watching Locked Channels
Once a channel is locked, whenever you want to watch a locked channel, correct PIN must be entered. (Scr. 25)
9.0 INSTALLATION
9.1 Antenna Power
The default setting is
OFF
. Set this option to
ON
if this receiver is connected to an external active antenna that amplifies
the received signal. This receiver box can supply 5 V DC at 50 mA maximum.
Caution
:
If you are using a normal passive antenna, make sure to set this setting to
OFF
. (Scr. 17)
9.2 Country Setting
Country
:
Select the country you are located. Depending on the country you select, the LCN mode and time
zone settings change accordingly. (Scr. 1)
9.3 Language
OSD Language
:
Select the on-screen-display language as required.
Audio Language
:
This option allows you to select your audio language. If neither of your selected language is available
on the program transmitted, the main language of the program will be used. You can alternatively
press the
AUDIO
key (in viewing mode) to use another available language.
Subtitle Language
: Allows you to select the subtitle language. If your selected language is not available on the program
transmitted, the main language of the program will be used. You can also select OFF to close the
subtitle on the screen.
9.4 Time Setting
Select an appropriate time zone to display the local time correctly. Both EPG and system schedule need a correct time
zone setting.
Auto Time Zone
:
Allows you to enable/disable Greenwich Mean Time (GMT) usage & the time zone which is adjusted
through your adjusted country.
If you prefer to set the time manually, select
OFF
in
Auto Time Zone
item and then manually select the time zone. (Scr. 2)
9.5 Program Search
Auto Scan
1. Enter the
Auto Scan
menu via
Main Menu > Installation.
2. Select
Auto Scan
(
RED
) to start auto search. (Scr. 1)
3. Select whether to erase your previous channel list as required or to cancel Auto Scan. (Scr. 26)
4. Wait to complete the scanning.
In case you want to stop the scanning, press the
EXIT
key. The channels already found will still be stored.
(Scr. 4)
5. When finished, the first found channel will be played.
Summary of Contents for PRIMA III
