Strong Racks PowerRax Double Bike Lift, Manual

Page: 29 / 33

12 Continued
The easiest method is to determine what bicycle will go on the bottom. From the
floor measure to the locations you want your hooks, carry that measurement to
the bike lift. You will want to know the bike lift width, as it will help locate your
hook placement. When installing the support tubes, add an additional 1-3 inches
to keep your tires from resting on the ground. The upper bike is the same method,
you will need measure from the floor to the highest point on the lower bike. This
measurement will be added to the floor to hook measurement.
29
Hardware Required:
x4
x4
Installation of all
support tubes are
the same.
Floor
Floor
+ 1 - 3” to floor under
bike lift
Highest
Point on
lower bike
x4
and