Strong International XENON GLADIATOR IV, Instruction Manual

Page: 37 / 48

Item Part No. Description
1 72-00212 Fade Out Housing, Welded Assembly
2 72-00262 Bell Crank, Fade Out Dousers
3 51155000 Control Lever, Fade Out
- 4257102 Flatwasher, 1/4"
SAE
- 4258001 Hexnut, 1/4-20
4 72-00268 Lower Douser Blade Assembly
5 72-00265 Upper Douser Blade Assembly
6 72-00272 Heat Shield, Upper Blade
7 72-00271 Heat Shield, Lower Blade
8 83351000 Pivot Adjusting Plate, Douser Blades
- 4100503 Mounting Screw, 10-32 x 1/2"
9 24332000 Cover Shield, Heat Filter
10 81847000 Heat Filter Holder, Welded Assembly
11 72-00273 Pull Rod, Short
12 72-00274 Pull Rod, Long
- 01704000 Hitch Pin, Pull Rods (not shown; 4 req’d.)
13 51153000 Spacer Bushing
14 4318004 Lock Nut, 5/16-18 Hex
15 4507106 Washer, 1/2"
Brass
16 4317102 Washer, 5/16" SAE (2 req’d.)
17 72-00504 Heat Filter & Ring Assembly
18 41-98003 Stand-Off, 1/4" Hex (4 req’d.)
19 51-56016 Stand-Off, 7/8" (4 req’d.)
20 4080375 Mounting Screw, 8-32 x 3/8"
Pan Head
22 4080250 Mounting Screw, 8-32 x 1/4"
Pan Head
23 4251500 Mounting Screw, 1/4-20 x 1-1/2" Hex Head (3 req’d.)
24 4257001 Lockwasher, 1/4"
25 4258001 Hexnut, 1/4-20
PARTS LIST
Figure 4
XG4/035