2.9
Safety symbols/pictograms on the GTES
The GTES is equipped with the following safety symbols/pictograms.
Prohibition signs
Explanation
Observe the instructions in the documentation.
Do not step on or use as a climbing aid!
2.10
Wear personal protective equipment
Personal protective equipment must be worn for all work to be carried out, see section 2.7.3. The wearing of
personal protective equipment must be monitored by the operator. It may be the case that the operator has to
meet additional measures.
2.11
Basic responsibilities of the operator and personnel
The following fundamental responsibilities of the operator and personnel must always be observed when han-
dling the GTES.
• After assembling the GTES, a risk analysis of the workplace must be carried out by the operator on the com-
plete machine. In addition to the documentation, operating instructions must be created.
• In addition to the documentation, observe and instruct adherence to general legal and other binding regula-
tions on accident prevention and protection of the environment. Such obligations can also, for e.g., affect the
handling of hazardous substances or the provision/wearing of personal protective equipment.
• Supplement the documentation with your own instructions, including supervisory and reporting obligations for
specific operational matters, e.g., with regards to the organisation of work, work sequences and appointed
personnel.
• Never make changes, additions or conversions to the GTES without the manufacturer's approval. If any
changes are made to the GTES that impair safety, they must be reported to Stromag immediately.
• Only use genuine spare parts.
2.12
Safe handling of rotating components
The following safety guidelines must always be observed when handling rotating components.
• Before commencing work, shut down the machine and secure it from switching back on.
• Never operate the machine without separating protective equipment.
• After inspection and maintenance work, remount the separating protective equipment.
2.13
Safe handling with hot surfaces
The following safety guidelines must always be observed when dealing with hot surfaces:
• Before commencing any work, first allow the hot surfaces to cool down.
2.14
Safe handling with electrical hazards
7
Mounting/operating instructions Gear limit switch Type series HGE • No. 152-00000 F • 10/2017
