manualshive.com logo in svg

Strobel 3200D series, Operating Instructions Manual

Share
Download
Strobel 3200D series Operating Instructions Manual Download Page 37

 

 

 

33 

BA_3200D_A1_140203_en

 

6

 

 

Machine maintenance 

 

 

C A U T I O N !  Danger of injury! 

Disconnect the machine from the mains and ensure that it 
is off by pressing the pedal for switching the motor. 
Otherwise there is a 

danger of injury

 through crushing and 

needle stitches. 

 

The machine must be oiled daily at the points marked red (oil bottle is included 
with the machine accessories). For this remove the housing cover on the right 
top, the under arm cover bottom left and the head hood. 

Fabric fibres and dirt which collect at the movable parts of the machine must be 
removed, as they could cause errors and impair the operating safety. 

The hook path should also be oiled from time to time with a drop of oil, there is 
a bore for this in the hook cover. 

6.1 

For oiling the machine only oil with a viscosity of 46 cSt must be used and can 
be purchased with the following part number: 

Lubricants 

291.0107 oil with can 0.5 litre 

Summary of Contents for 3200D series









































Reviews:

No comments

Brands by name

Popular brands

Load more brands