Strobel 3200D series, Operating Instructions Manual

Page: 35 / 40

31
BA_3200D_A1_140203_en
•
The sewing result is not according to your expectations
Possible causes :
- Damaged sewing tools or wear due to improper use or natural wear
after longer use of the machine.
- Machine has displaced itself mechanically
- Unsuitable needle thickness (see point “4.1 Needles and threads”)
- Unsuitable sewing thread (see point “4.1 Needles and threads”)
Remedy:
- Exchange damaged parts, service
- With mechanic; see also mechanic’s instructions; maybe call service
- Exchange needle, check also needle point as to damage
•
Marking or damage to the sewing material
Possible causes :
- Unsuitable transporter – gear
- Incorrect setting of the sewing tools
- Damaged sewing tools
- Unsuitable needle thickness or thread thickness
Remedy:
- Check settings
- Check transporter (gear), if necessary exchange transporter
- Select correct needle and thread for sewing material
•
Difficulties when transporting the sewing material (stitch length)
Possible causes :
- Transporter is incorrectly set
- Unsuitable transporter – gear
- Incorrect presser plate lift
- A sewing material build-up in the stitch plate, especially with cross
seams
Remedy:
- Check settings, if necessary change transporter
- Check stitch plate underside, transport tools and sewing tools for
damages, if necessary replace or repolish