Strobel 3200D series, Operating Instructions Manual

Page: 16 / 40

12
BA_3200D_A1_140203_en
3.3
The correct sense of rotation of the hand wheel is clockwise when looking at it
from the front.
Sense of rotation (Fig. 3)
Fig. 3
3.3.1 Tension of the toothed belt (Fig. 4)
C A U T I O N ! Danger of injury!
To check the tension of the toothed belt, switch off the
machine electrically, pull the mains plug and ensure the
machine has actually stopped by pressing the motor pedal.
The machine must not be operated without a belt guard for
the motor.
The tension of the toothed belt should not be too great. Slight thumb pressure
should be able to push the belt through by approx. 10 mm.
A too little or too great toothed belt tension can deteriorate the positioning of the
machine and therefore impair the function sequence.
Tensioning the toothed belt (Fig. 4):
- Release upper and lower retaining screw (1), (2) at the machine upper
part.
- Pull out the motor slightly and tighten the lower retaining screw (2) slightly.
- Tension the toothed belt by swivelling the motor.
- Retighten the upper and lower retaining screw (1), (2).