Strobel 218D-TP-R, Mechanic'S Instructions

Page: 5 / 42

1
MA_218D-TP-R_A4_181015_en
Mechanic's instructions
STROBEL Class 218D-TP-R
Contents
1 General notes on safety ............................................................................................ 5
2 General ..................................................................................................................... 7
2.1 Operating instructions ..................................................................................... 7
2.2 Class description, machine number and reference position left/right ............. 7
2.3 Machine applications ...................................................................................... 7
2.4 Technical data ................................................................................................ 8
2.5 Brief setting instruction ................................................................................... 9
3 Hints for repair and settings .................................................................................... 10
3.1 Mounting the needle plate ............................................................................ 10
3.1.1 Removing the needle plate (Fig. 1) .................................................. 10
3.1.2 Remounting the needle plate ........................................................... 11
3.1.3 Setting the needle plate (Fig. 1) ....................................................... 11
3.1.4 Adjusting the needle ........................................................................ 12
3.1.5 Replacing the needle slide plate (Fig. 2) .......................................... 12
3.2 Needle lever ................................................................................................. 13
3.2.1 Setting the needle lever path (Fig. 1) ............................................... 13
3.2.2 Lateral adjustment of the needle lever (Fig. 1) ................................. 13
3.3 Stroke of loop ............................................................................................... 14
3.3.1 Setting the needle stroke (Fig. 3) ..................................................... 14
3.4 Looper .......................................................................................................... 15
3.4.1 Removing and re-mounting the looper (Fig. 3 + Fig. 4) .................... 15
3.4.2 Setting the shuttle in relation to the needle (Fig. 5) .......................... 16
3.4.3 Removing and fitting the bobbin case (Fig. 5) .................................. 16
3.4.4 Thread tension - bobbin thread (Fig. 7) ............................................ 17
3.4.5 Setting the bobbin case venting (Fig. 4) ........................................... 17
3.5 Feed motion .................................................................................................. 18
3.5.1 Feed (bottom feed) (Fig. 9) .............................................................. 18
3.5.2 Setting the feed motion (Fig. 8) ........................................................ 18
3.6 Presser plate ................................................................................................ 19
3.6.1 Setting the presser plate (Fig. 9) ...................................................... 19