12
MA_218D-TP-R_A4_181015_en
3.1.4
Adjusting the needle
A t t e n t i o n !
Switch off machine electrically!
The needle is adjusted in a lateral direction so that it is situated centrally in
relation to the needle plate (i.e. between the two screw holes).
3.1.5
The needle slide plate is attached to the top of the needle plate. It can be
removed by slackening the screw (1).
Replacing the needle slide plate (Fig. 2)
The channel of the needle of the needle slide plate should be centred on the
needle.
Fig. 2
