10
MA_218D-TP-R_A4_181015_en
3
Hints for repair and settings
A t t e n t i o n , danger!
Observe safety and operating instructions before realizing
any maintenance and repair works.
Failure to do so may result in heavy bodily injuries.
3.1
Mounting the needle plate
A t t e n t i o n !
Switch off machine electrically!
Needle plates are set at works and can be replaced easily as complete kit.
3.1.1
1.
Switch off the machine at the mains
For pneumatic venting: plunger, presser plate and feed are vented.
Removing the needle plate (Fig. 1)
2.
Remove needle.
3.
Pull off lower arm cover.
4.
Vent plunger, presser plate and feed using knee lever.
5.
Push screw driver between lower arm and leaf spring.
6.
Slacken bolt (5) and remove needle plate from machine.
