15
MA_218D-TP-R_A4_181015_en
3.4
3.4.1
Looper
Removing and re-mounting the looper (Fig. 3 + Fig. 4)
A t t e n t i o n !
Switch off machine electrically!
Dismantle the following parts:
Cover (rear of head), needle, needle plate, angle lever (2) (Fig. 4) with bolt (5)
and spring (1) (Fig. 4)and bevel wheel (2) (Fig. 3). The shuttle can now be
removed from the front.
Fitting in reverse order.
Ensure that the teeth of the bevel wheels marked red, (2) (Fig. 3) and (1)
(Fig. 3) and the surface of the shuttle shaft form one line again when
assembled.
Fig. 4
