AUDACES
8
Connection to computer: make sure that the plotter is OFF, insert one of
the USB line ends into the computer USB port, and connect the other end to
the plotter USB port.
Attention: It would be better that a computer is specially used only for
the plotter. The USB port cannot be shared with other equipments.
Please do not install the special-plotter computer with drive programs for
other printer, the scanner or other devices.
2.3 Working Conditions
Temperature:
10
℃
- 30
℃
.
Humidity:
15%-85%RH non-condensation
Working conditions: clean environment, no strong electro-magnetic source
nearby will be better.
Attention: Temperature should not be higher than suggested one,
otherwise, possible effect to the performance of the plotter may occur.
Warning: The USB data cable can only be taken off after
the computer and the plotter are turned off. Do not use USB
hub, otherwise, the plotter could be damaged.
Summary of Contents for AUDACES Jet Lux Plus
Page 2: ...AUDACES 2...
