AUDACES
25
B>, Adjust most right line. Make most right line straight by adjusting <Right
1>/< Right 2>/< Right 3>/< Right 4> value. As below picture<Figure6-8>.
Normally <Right1> value keeps same, adjust Right 2/ Right 3/ Right 4 value. If
printing line deviation left, you should decrease value; if printing line deviation
right, you should increase value.
Figure6-8
3
，
If
Four Head
is chosen in
Plotter Type
menu, click tab <Deviations>, a
dialog window appears as in the following picture:
There are 9 kinds of Plotting Speed available, in case lower speed
selected, noise will be lower, please choose Plotting Speed according to your
different requirements.
Select the box of Bidirectional Plotting, the plotter will enter the state of
bidirectional plotting mode. Bidirectional plotting will increase the speed of
plotting. But in this mode the value of <INK2 Positive Deviation> / <INK3
Positive Deviation>/ <INK4 Positive Deviation>/ <Negative Deviation> / <Left
1>/ <Left 2>/ <Left 3>/ <Left 4>/ <Left 5>/ <Left 6>/ <Left 7>/ <Left 8>/ <Right
1>/ < Right 2>/ < Right 3>/ < Right 4>/ <Right 5>/ < Right 6>/ < Right 7>/ <
Right 8> needs to be adjusted carefully.
<Value of Step> is to adjust the deviation of plotting along X (Length)
direction.
Methods of adjusting lines deviation
：
1>, Adjust middle line in printing area:
A>.adjust parameter <INK2 Positive Deviation>
Summary of Contents for AUDACES Jet Lux Plus
Page 2: ...AUDACES 2...
