AUDACES
16
Chapter 6 Installation and use of the software
6.1 Installing the software
6.1.1 USB driver installation instructions
If the connection port between computer and plotter is USB port, the USB
driver software must be installed on your computer so that the plotter can be
operated normally.
Attention: Before the installation, please close all the running
programs as well as the anti-virus program, if your computer has
installed control center software of other edition, please uninstall them.
Turn off the computer and also the plotter; connect the USB cable to the
main-board port of the plotter and the computer USB port.
Turn on the plotter and computer; the computer can automatically find the
hardware. After a few moments, a message such as “New Hardware Found”
appears. The software can be installed according to following messages:
[1] -Choose the floppy disk installment, and then click
“NEXT”.
Summary of Contents for AUDACES Jet Lux Plus
Page 2: ...AUDACES 2...
