Stricker Lipo Smart Series, Additional Operating Instructions

Page: 14 / 20

12
R&E Stricker Reha-Entwicklungen GmbH Additional operating instructions Lipo Smart
Battery and charger
7 Battery and charger
SAFETY NOTICE
Be sure to read and observe all safety and hazard
information („ 5.1 Safety instructions for battery
and charger “).
WARRANTY NOTICE
Batteries are wearing parts. The warranty period
is 24 months.
DISPOSAL INSTRUCTIONS
Dispose of batteries only at designated disposal
points. If you have any questions, please contact
a specialist dealer or the manufacturer.
7.1 Charging the battery
WARNING
Before using the charger, check that the mains
voltage matches the connection voltage of the
charger. The connection voltage of the charger is
indicated on its type plate.
We recommend charging the battery after each
use of the traction unit. If the battery is completely
discharged, recharge it immediately.
Charge the battery before each use. Check the
charge level of the battery before each ride. If the
battery is completely discharged while driving,
further driving is only possible manually via the
cranks.
Only switch on the battery for use. Switch the
battery off immediately when you switch off the
traction unit.
7.2 Equipment
As standard, a Lipo Smart is equipped with a
maintenance-free lithium-ion battery. Since the
battery has no memory effect, you can charge
the battery at any charge level without hesitation.
You do not need to fully discharge the battery
before charging. The battery has a fuse at a point
depending on the production date. New fuses can
be obtained from us.
7.3 Mounting the battery
The battery is attached to the frame by a bracket
and secured by a lock. You can remove the battery
from the holder for charging, changing or transport.
To do this, turn the key anti-clockwise. Slide the
battery off the holder on the side of the lock.
After fixing, lock the lock again by turning the key
clockwise. Remove the key and store it safely to
prevent the lock from being opened while riding.
Fig. 20: Battery mounting
7.4 Storage
Fully charge the battery before storing it for a
longer period of time. Make sure that the battery
is switched off for storage. Check the charge level
every three months and fully recharge the battery
if necessary. Also observe the notes in („ 5.1.3
Storage “).
8 Repair, cleaning and
maintenance
Never use cleaning gasoline, thinner, acetone
or similar agents for any cleaning processes.
Likewise, do not use abrasive or aggressive
cleaning agents. Instead, use only commercially
available household cleaning agents and
disinfectants (isopropanol)..
8.1 Wheel change
Before you can remove the wheel of the Lipo
Smart, you must disconnect the motor cable at
the fork. To do this, you may need to unravel cable
ties. Once the motor cable is disconnected, you