Stricker Lipo Smart Series, Additional Operating Instructions, Page: 8 / 20

6
R&E Stricker Reha-Entwicklungen GmbH Additional operating instructions Lipo Smart
Operation
As soon as you feel that you are moving in the
direction of travel, you can release the brake
completely.
6.1.5 Display of the charge level
You can check the battery charge level at any time
using the LED display. To do this, press the button
on the top of the battery. The charge level is also
shown on the left display.
6.1.6 End of ride
Turn the speed control knob on the handlebar to 0
to prevent unintentional driving off when moving
the cranks.
Turn the key switch with the key to the „
OFF “
position . Remove the key and stow it away safely
(Fig. 3).
Turn off the battery with the main switch on the
battery. You will know the battery is off when the
light on the battery goes out.
Fig. 3: Lipo Smart control unit position „OFF
6.1.7 Optional equipment: 2 Lipo
batteries with 2 change-over
switches
This optional equipment for the Lipo Smart gives
you a towing unit with two batteries on the fork and
a control box with two linked toggle switches. The
standard battery holder on top is omitted with this
equipment.
You cannot operate the two batteries in parallel.
Use the two switches to toggle the batteries and
the display. Always switch both switches at the
same time. Make sure that both switches are in the
same position at all times.
Fig. 4: Battery left switched on