32
●
Never drop or insert any object into any opening.
●
Do not apply excessive force when using the button on the devices.
●
If it is no longer possible to operate the Bike Light Set safely, take it out of operation and protect it from any
accidental use. A safe operation can no longer be guaranteed if the devices:
are visibly damaged,
are no longer working properly,
has been stored for extended periods in poor ambient conditions or
has been subjected to any serious transport-related stresses.
Persons & Use
●
The Bike Light Set is not a toy. Keep and store the lights out of the reach of small children.
●
The Bike Light Set can be used by children aged 6 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning the use of the device safely and they understand the resulting hazards.
Electronics & USB Adapter
●
You may not reconstruct, self-repair, or disassemble the Bike Light Set. This can damage the devices.
●
Maintenance, modifications, and repairs may only be carried out by an expert or a qualified shop.
●
Check the devices from time to time for damage. Never use the devices if they show signs of damage.
●
Only use a USB adapter 5V dc / (max.) 2A output (not included in the package) to charge the Bike Light Set.
Another adapter with the wrong specifications may cause malfunction and/or damage. Charging with a power
bank or using a USB port of a laptop/computer is allowed, but not recommended.
●
To prevent damage to the adapter and/or the Bike Light Set, make sure your power mains socket supplies the
correct power supply for the USB adapter.
●
The mains socket must be located near the devices and easily accessible.
●
Always remove the USB adapter from the wall socket when the device is not in use, the battery is not being
charged, and before cleaning.
●
Never force the plug of your USB adapter into a mains socket; if it does not fit easily into the mains socket,
stop using it. Always make sure that the plug of your USB adapter is properly connected to the mains socket.
●
It is normal for the USB adapter to feel a little warm; however, a loose fit between the mains socket and the
plug of the USB adapter can cause overheating and deformation of the plug. Contact a qualified electrician to
replace the loose or worn mains socket.
●
To disconnect the USB adapter, grasp the adapter housing and pull the adapter out of the mains socket.
●
If the power fails during the operation, turn off the device immediately and pull the USB adapter from the
mains socket.
●
If there's smoke, fire, or a strange odor coming from your device or USB adapter, you should turn off both the
device and the circuit breaker or fuse box's main switch.
●
For safety reasons, always disconnect the USB adapter in the event of a thunderstorm.
