35
CLEANING
●
Disconnect the device before cleaning. Always unplug your USB adapter.
●
A soft dry cloth is recommended for cleaning the exterior of the lights.
●
Be careful not to put too much pressure on the button of the light while cleaning.
●
Do not immerse the lights in water or any other liquids.
●
Under no circumstances use aggressive cleaning agents, cleaning alcohol, or other chemical solutions since
these can penetrate the housing or impair functionality.
●
Do not use a wire brush, steel wool, or other abrasive objects for cleaning.
●
Cleaning must not be performed by children unless supervised.
MAINTENANCE & SERVICE
●
The Bike Light Set does not require any maintenance.
●
You may not reconstruct, self-repair, or disassemble the Bike Light Set.
●
Check regularly for damage and severe wear.
WARNINGS:
●
Do not attempt to open the lights for maintenance. Removing the housing or improper reassembly may
cause electric shocks, damage, short circuit, or fire.
●
If for any reason you open the housing, the warranty will become null and void. The lights contain no
user-serviceable parts. The batteries or LED’s cannot be replaced.
●
To obtain maintenance or service, contact us first at our email address
. Repairs should
only be carried out by an expert or a qualified shop.
STORAGE & TRANSPORT
●
We advise cleaning the lights before long-time storage.
●
Store the devices in a place not exposed to sunlight & humidity, which is dust-free.
●
Do not store the lights in extremely high or extremely low temperatures. This can damage the devices.
●
Store the devices beyond the reach of small children.
●
Once every few months, discharge the batteries fully and recharge.
●
Protect the devices against vibrations and shocks during transport.
