31
TROUBLESHOOTING
If the bike light does not turn on or works intermittently:
Charge the bike light for 3 hours or until the red LED indicator light turns green.
If the bike light does not charge:
●
Inspect the bike light and charging cable for any damage or corrosion.
●
Check the USB charging cable connections and the power source.
●
Replace the USB charging cable.
Note:
A computer in sleep mode might not charge the bike light.
If the bike light appears dim or faded:
●
Charge the bike light for 3 hours or until the red LED indicator light turns green.
●
Replace the USB charging cable.
SAFETY INSTRUCTIONS
READ
the user instructions carefully and especially observe the safety information. If you do not follow
the safety instructions and information on proper handling in this manual, we assume no liability for any
resulting personal injury or damage to property. Such cases will invalidate the warranty.
Also, observe the safety instructions in the individual chapters of this manual.
YOUR RESPONSIBILITIES:
Electrical appliances and batteries can expose people, especially children, to hazards that can cause
serious injury or death. The use of electrical appliances and batteries can present hazards including, but
not limited to, injury, fire, electric shock, and damage to the electrical system. These safety instructions
are intended to give you the information you need to use the
STREX
Bike Light Set and avoid such
hazards. Common sense and respect for the device will help reduce the risk of injury.
Contact us by email at
, if you have questions that remain unanswered by these warnings & safety
instructions.
General Device Safety
●
Do not use the Bike Light Set for any other purpose other than its intended use (see the chapter “INTENDED
USE”).
●
The Bike Light Set is designed and intended for private use and is not suitable for commercial purposes.
●
The Bike Light Set is meant for outdoor use. It is recommended to keep the devices out of direct sunlight for
extended periods when used outdoors.
●
Handle the devices carefully. Jolts, impacts, or a fall even from a low height can damage the devices.
●
Do not place the devices under mechanical stress.
●
The devices need to be properly and securely installed and mounted. Follow the instructions to prevent any
possible damage/injury.
●
Never use accessories not recommended by the manufacturer. They can pose a danger to the user and damage
the devices.
