- If the ingredients stick to the extension or the walls of the bowl, switch off the appliance, unplug it and wait
until the rotating parts have stopped. Clean the attachments and the walls of the container with a spatula.
You can then restart the appliance.
- Make sure that no hair, clothes or other objects get into the opening of the meat grinder during operation.
Only insert the raw materials to be processed into the filling hole.
- Never use your fingers or other objects to push the ingredients through the filling hole in the meat grinder.
The food slider, which is part of the package, is used for this purpose.
- WARNING: Improper use can lead to injuries.
- Take extra care when handling the grinding blade in the meat grinder and the blender blade unit to avoid
injury from the blade. Extra care must be taken when emptying the blender jar, when removing the blade
unit from the jar, when removing the grinding blade from the container and when cleaning.
- Do not try to grind bones, nutshells or other hard ingredients.
- You can process hot liquids with a temperature of up to 55 °C in the mixing bowl. Take extra care when
handling hot liquids. Hot steam or splashes of hot liquids and food can cause scalding. Never start the blender
without the lid on properly. If you are handling hot liquids, do not remove the inner cap during operation.
Do not touch the heated surface. Use the handle to carry the heated mixing bowl.
- The maximum continuous operation time is 24 minutes. Allow the appliance to cool down for 15 minutes
before starting again.
- Always switch off and unplug the appliance when not in use, if it is left unattended and also before assembly,
disassembly, cleaning or relocation. Before disassembling the appliance and replacing accessories or
accessible parts that move during use, wait until the moving parts have stopped.
- Clean the appliance according to the instructions in the "Cleaning and maintenance" section.
- Under any circumstances do not switch the appliance on while it is empty. Improper use of the appliance
can affect its service life.
- Make sure that the plug of the power cord does not come into contact with moisture. Do not place heavy
objects on the power cord. Make sure that the power cord does not hang over the edge of the table or touch
a hot surface.
- Do not unplug the appliance by pulling on the cable cord. This may damage the power cord or power outlet.
Disconnect the cord from the outlet by pulling on the plug of the power cord.
(*) Authorized service: The manufacturer's or importer's service department or another person who is
qualified, authorized and qualified to perform this type of repair. The stand mixer must be handed over to
such a service in the event of a repair.
OPERATION
BEFORE THE FIRST USE
- Remove the appliance and its accessories from the packaging.
- Thoroughly wash all food contact parts with warm water using a neutral kitchen detergent. Then rinse them
under clean running water and wipe thoroughly dry with a soft cloth or let them dry freely.
ASSEMBLING
- Before starting to install or remove the appliance, make sure that the appliance is switched off and
unplugged and that the rotating parts of the appliance are not moving.
1. Inserting the bowl and attaching the cover
- Place the stand mixer on a flat, dry and stable surface, such as a kitchen worktop.
- Press the multifunction head release button to unlock the multifunction head and fold it up as far as it will
go. Release the release button when the multifunction head is opened. Locking the multifunction head in
the upper open position is signaled by returning the release button to its original position, which is
accompanied by a distinct click.
- Insert the stainless steel container into the base and secure it by turning it clockwise. The container is
properly fastened when it cannot be lifted separately from the base
- Mount the cover on the bottom of the multifunction head so that the catches around the perimeter of the
Summary of Contents for 801579
Page 44: ...4 24 4 4 24 4 roky ...
