EN
INTENDED USE
Expanded Polystyrene (EPS), Extruded Polystyrene (XPS), Polyethylene, Cross-Linked, Polyethylene,
Polypropylenes, and many other foamed plastics and materials can be easily cut with Hot Knife.
Use the device only for its intended purpose. Any other use is considered a case of misuse. The user / operator
and not the manufacturer will be responsible for any damage or injury caused by this misuse. Please note
that this device has not been designed for commercial or industrial use. The warranty will not be valid if the
equipment is used for commercial, industrial or similar purposes.
TECHNICAL PARAMETERS
MODEL
GW8005
VOLTAGE / FREQUENCY
230 V / 50 Hz
POWER
max. 150 W
PROTECTION CLASS
I
TEMPERATURE
max. 550
°C
TEMPERATURE ADJUSTMENT
16 positions
DIMENSION
310 x 210 x 85 mm
Accessories:
- 150 mm stainless steel blade
- cleaning brush
- hex key
- molded case
SYMBOL EXPLANATION
The product complies with the applicable European directives and the conformity assessment
method of these directives has been implemented.
Read the instructions for use.
Protection class I.
Do not dispose of as normal household waste. Instead, contact your recycling center in an
environmentally friendly way. Please take care of environmental protection.
Wear a respirator.
Wear protective gloves.
Recyclable product.
A financial contribution has been made for the recovery and further recycling of the container.