1. Once a suitable mounting location is determined choose which
mount will be used, if using the adhesive mount ensure that the
window is clean prior to application, remove the backing tape and
press and hold the bracket firmly against the glass for 2 minutes,
then wait 20 minutes before attaching the camera. The 3M adhesive
tape will achieve 50% bond after 20 minutes, 100% bond is achieved
after 72 hours, if the camera is attached to the mount bracket too
soon after installation the adhesive may not bond correctly to the
glass.
2. Fix the power cable across the passenger side where possible to
prevent the line of sight from being affected
3. Insert the in vehicle charger into the cigarette lighter socket of the
vehicle.
4. Adjust the angle of the DVR lens ensuring that the camera lens is
aimed slightly down from the horizon (40% sky, 60% road), this will
improve the results of the auto white balance function.