Basic operation description
1.
Automatic Recording
When you start your vehicle the DVR is automatically started and the
recording commences.
At power off the DVR will automatically save the current recording
and will power down. The recordings are saved according to the
setting chosen in the loop recording menu. As the card reaches
capacity the oldest recordings are automatically deleted to allow
recording to continue seamlessly.
[Note] Any event files that are recorded, whether automatically
locked by the G-Sensor or manually locked are not overwritten during
the normal loop recording process.
2.
Manual Recording
Press the <
POWER
> button, the DVR will power on and begin
recording automatically. Press and hold the <
POWER
> button for 5
seconds, the DVR will save the recording automatically and will then
power off.
3.
Motion Detection Function
In standby mode press the <
MENU
> button to enter the settings
menu. Press the <
DOWN
> button to move the cursor to the Motion
Detect option and press the <
OK
> button to enter the Motion Detect
settings submenu, press the <
UP
> or <
DOWN
> button to changes
settings then press <
OK
> to save and exit the Motion Detect
submenu. Press the <
MENU
> button to exit the menu.
