Settings
The DVR is pre-set with logical default settings and is ready to
operate with minimal adjustment required, when powered on the
internal capacitors will charge, the DVR will then power up and
recording will commence.
[Note] The DVR does not contain a battery and will need to be
connected to a power source to configure settings,
connecting to a
computer USB port as a power source is not supported.
Before using the DVR it is important to adjust the time and date
settings, to set the time and date connect the DVR to power, stop
any active recording by pressing the
OK
key then press the
MENU
key to enter the
SETUP
menu, press the
DOWN
key to scroll down
to the
date/tIME
menu, press the
OK
key to enter, press the
OK
key to advance to the next setting and adjust accordingly, press the
MENU
key to save and exit when done.
[Note] If you are in a region that supports daylight savings remember
to adjust the time at the beginning and end of the period accordingly.