Streck ESR-Auto Plus 506, Operator'S Manual

Page: 27 / 86

ESR-Auto Plus Operator’s Manual 19
4.1 Standby Menu
12:00
next sample...
The instrument is ready to accept a new sample in standby
mode. If the instrument is in a menu selection or in a
different sequence of the program, press to advance to
the standby display.
menu
1.search sample
From standby, press and hold until you hear a beep to
access the user menus. Enter the corresponding numeric
value to select the desired menu function or press on
the desired function as it appears on the display.
The available user menus will scroll on the display:
1 - SEARCH SAMPLE
2 - CHECK POS 1-10
3 - PRINT LOG FILE
4 - CONTR. SAMPLES
5 - RUN TEST RACK
6 - OPTIONS
4.2 Menu 1: Search Sample
The ESR-Auto Plus will store a maximum of 500 sample
records. It is advised that labs print the Log File regularly and
purge data to avoid exceeding storage capacity. The ESR-
Auto Plus searches all samples currently in process for an
ID match before searching the sample log internal memory.
The search results may be reprinted on the internal printer
and/or DATA OUTPUT port.
menu
1.search sample
Press to search for a sample result by sample ID.
search sample
id: 123_
Enter the sample ID code using the keypad or barcode
scanner. Partial ID codes can be used, but they must be
the start of the ID code. For example, to search for ID code
12345, enter 123 to return all ID codes starting with 123.
Press and hold the number keys to display the corresponding
letters A-Z. A blank search sample entry will display all
samples contained in the log file on the LCD in ascending
ESR scan order.
Chapter 4
|
Menu Functions 1 - 5