2
ATI SP 80, 120, 220, 300, 400 – INSTALLATION INSTRUCTIONS
Sept - 01
•
The following instruction book is
integral and essential part of the appliance
, and it has to be
kept with care near the appliance, for any further consultation.
•
The
appliance has been manufactured for hot water production:
any other use of it has to be
considered dangerous and not suitable.
•
The
appliance is not to be installed in damp rooms
, it has to be protected from water splashes
or other liquids, to avoid anomalies to electrical and thermal devices.
•
Installation has to be made by
professional qualified people
, who are responsible and aware of
the safety regulations in force. A wrong installation, caused by not observing the manufacturer’s
instructions
can cause danger
to people, animals or things for which the manufacturer can not be
considered responsible.
•
The
guarantee
for all devices is 12 months from the data of the installation, and however not
further 24 months from the manufactured period signed on the data label of the appliance.
•
The appliance, as it is turned on,
has to be checked
by an Authorised Assistance Centre.
•
Packaging parts (i.e. plastic bags, polystyrene, woods, clips, nails, etc.)
can be harmful to
children and should be carefully disposed of immediately.
•
Read carefully
the instructions and the advice contained in this booklet, concerning safety,
installation, use and maintenance.
•
If the appliance is sold or transferred to a new owner, make sure that this booklet stays with the
appliance, so that the new owner or installer can consult it.
•
Do not place anything upon the appliance.
•
To avoid damages caused by low temperatures
, if the appliance has to be left unused for a
long period in a non-heated room, it is recommended the unit is drained down completely. The
manufacturer is not responsible for faults, breakdowns or for water leakage from the plant caused
by low temperatures.
•
To comply with the Guarantee, we advise you to adhere to the following instructions and to use
only
original spare parts and kits
, supplied by the manufacturer.
INDEX page
1 - GENERAL INFORMATION AND CHARACTERISTICS
1.1 APPLIANCE’S CLASSIFICATION
1.2 PACKAGING CONTENT
1.3 CONSTRUCTIONAL AND OPERATIONAL DESCRIPTION
1.4 CONTROL AND SAFETY DEVICES
1.5 INSTRUMENT CONTROL PANEL
1.6 DIMENSIONS AND CONNECTIONS
1.8 TECHNICAL DATA
1.10 EXPLODED VIEW MOD. 80-120 (TAV. 105)
1.11 EXPLODED VIEW MOD. 220-300-400 (TAV. 106)
2 - INSTALLATION INSTRUCTIONS
2.1 REFERENCE REGULATIONS
2.2 INSTALLATION RECOMMENDATIONS
2.3 LOCATION OF THE APPLIANCE
2.4 INSTALLATION OF FLUE HOOD
2.5 WATER CONNECTIONS
2.6 GAS CONNECTIONS AND REGULATION
2.7 CHANGING THE GAS SUPPLY
2.8 ELECTRICAL CONNECTIONS
2.9 CONNECTION OF SEVERAL WATER HEATERS
2.10 STARTING THE WATER-HEATER
2.11 FAULT FINDING
3 - USER INSTRUCTIONS
3.1 RECOMMENDATIONS FOR THE USER
3.2 STARTING THE APPLIANCE
3.3 SWITCHING OFF
3.4 MAINTENANCE
3.5 WARRANTY VALIDITY
3.6 TECHNICAL DATA FOR THE USER
