manualshive.com logo in svg

Streaming Video Technology PZ0064-4CH, User Manual

Share
Download
Streaming Video Technology PZ0064-4CH User Manual Download Page 4

     
   
 
                                                                                                                                                                     

PZ0064 

                                                                                                                 

www.securitycamera2000.com

 

4

2  HANDHELD IR REMOTE CONTROL 

                   

 

Each MDVR includes a handheld Infra-Red (IR) controller that allows the user to transmit commands 
to recording module and display on screen control menu   

 

Numeric 

Input Keys 

Use the numbers to input

 

Values in the system setup 

Screen or switch through the channels in live 

and playback. Plus and Minus   

are used to increase setup values one by one.

Navigation 

Arrows 

Use the ARROW keys to move between 

selections, input fields and icons.

 

Press ENTER to select 

And EXIT to return. Next and previous is also 

used to increase or decrease volume when at 

live or search screens. 

Summary of Contents for PZ0064-4CH



































Reviews:

No comments

Brands by name

Popular brands

Load more brands