M-X5-GUI-8CH-2013_Q3
More information
www.streamaxtech.com
Copyright
2012-2014, Streamax Technology Co., Ltd
All Rights Reserved
All specifications are therefore subject to change without notice.
If switch/alarm/log/lock all set as ON, When sensor triggered, it will trigger alarm signal and event log, it
will also trigger alarm recording and event recording, besides, the EVENT LOG can
’t be deleted even
HDD-formatted or overwrite.
3.2.4.1 SENSOR
These are I/O sensor functions to detect the drivers
’ behavior such as braking, turning left/right, closing/opening
the door, reversing etc
… Once these alarms are generated, they can be sent to central server by 3G network.
EN:
Enable, to active this function
NAME:
Press ENTER on the Name field to display the soft keyboard. Enter the text name to identify the source of
each Sensor connected to the unit.
OSD:
Input the numbers and characters, they will be embedded into the alarm video files when alarms happen,
and it will also display in live view, Please press
【
Enter
】
into the soft keyboard. The label also identifies the
type of event when doing a quick search using
EVENT SEARCH
option.
SET:
LOW (normal close) means high to low trigger the alarm.
HIGH (normal open) means low to high trigger the alarm.
ALARM:
Press ENTER to select between OFF or ON:
ON means when sensor triggered, alarm LED will flash, OSD will display in the live view, a red
“A” will
display in each channel, until re-login the system with account, the flashing will disappear, also, MDVR
will record the event log, and, if the security set as OFF, when you trigger the sensor, there is no alarm
LED flashing and MDVR won
’t record the event log.
LOCK:
To enable the event does not erase during the over-write process of hard disk;
NEXT PAGE:
Sensor trigger action means setup the alarm linkage for each sensor, for example, you setup the
ch1 as the alarm linkage for sensor1, when sensor1 triggered, ch1 will change to full screen. And the device will
response the trigger by PRI, sensor1 is highest, sensor8 is lowest.
3G ACT:
means you can define a sensor to active the 3G module, as there is an active mode in 3G setup interface,
they are corresponding options.
