M-X5-GUI-8CH-2013_Q3
More information
www.streamaxtech.com
Copyright
2012-2014, Streamax Technology Co., Ltd
All Rights Reserved
All specifications are therefore subject to change without notice.
While setting the DST, the former date must be earlier than the later date. If the two setting
sate is the same, the DST will be invalid.
TIME FORMAT:
12H or 24H, Press
【
ENTER
】
to select different format.
TIME SYNC SOURCE:
The system can adjust the time in different zone via
either “GPS” or “NTP”.
A:
While selecting the “GPS”, the MDVR device must have GPS connection (Should have GPS
module and antenna) and GPS must can receive the signal. When the system time arrives the
sync time, MDVR unit will synchronize with GPS time once.
B:
While selecting the “NTP” (Network Time Protocol), the device must have network access
connection and assign the NTP IP location
.
TIME ZONE:
Please choose the correct time zone for MDVR system.
SYNC TIME:
This is the time when the unit will sync the system time every day. The method depends on the
setting on the TIME SYNC SOURCE option:
NTP SERVER IP:
Input the IP server does support NTP protocol, in order to allow the system can have time
synchronization through the network. [Example: "192.43.244.18", "129.6.15.28",
"211.22.55.116", "194.88.2.60"]
DST:
Daylight Time. Only when it set on, the following option will available.
DST MODE:
There are two modes: Auto / custom. Auto: According to the international DST, i.e.: valid only
between 2AM on Second Sun in March and 2AM on First Sun in NOV.
Scroll to
【
SAVE
】
to make the setting valid.
3.2.1.2
GENERAL
ON/OFF TYPE:
There are ignition, timer and ignition or timer three options. They are the modes to boot up the
MDVR device (not for recording). For example the setting is timer from 5:00~12:00am,
