AD Plus2.0 User Manual
Page 31 of 66
button, the button is disabled.)
Client
: In this mode, the device can automatically search for a valid
Wi-Fi hotspot nearby for connection. After the successful connection, the
device can automatically connect to this hotspot after rebooting or
re-entering this area. By default, the AP mode is used upon the startup. If
the device is not connected with the EasyCheck app within 3 minutes, it
will automatically switch to the client mode. The device can be switched
to the AP mode when you push the button twice. After the switch, if the
device fails to connect to the EasyCheck App within 3 minutes, the device
will automatically switch to the client mode.
Disable
: In this mode, the Wi-Fi network is not enabled and the client
mode fails. The device uses the AP mode within 3 minutes after the
startup by default. (If the AD Plus2.0 is equipped with the AP mode
switch button, you can switch the device to the AP mode with the button.
After the switch, if the device fails to connect to the EasyCheck app
within 3 minutes, the device will exit from the AP mode and the module
will enter the sleep mode.)
3.
WIFI Mode
: specifies Wi-Fi frequency bands and can be set to 2.4G, 5G or
Adaptive.
4.
ESSID
: In AP mode, the entered value is the hotspot name when the hotspot
function of the device is turned on, and the Wi-Fi name when a mobile device
connects the device (no longer a serial number. After the connection, the
EasyCheck App can be accessed, and it can access the Internet as a mobile
terminal when the hotspot is enabled); In client mode, the entered value is the
Wi-Fi name when the device connects an external Wi-Fi.
5.
Encryption
Mode
:
In
AP
mode,
the
encryption
mode
can
be
None/WEB/WPA; In client mode, the encryption mode can be None, WEP,
WPA/WPA2-PSK, and WPA2.ENTERPRISE.
6.
Password
: In AP mode, the password is used for other mobile devices to
access Streamax MDVR. The correct password is required to connect the
Wi-Fi network (No password is required if the name and password are not
configured. In this case, tap the serial number or license plate number to
connect). In client mode, the password is used for connecting external Wi-Fi
networks.
Communication Module
Tap
Preferences
>
Basic Setup
>
Network
>
Communication Module
, as shown
in the following figure:
