STRATUS Floor Plate 2 post Lift Installation & Operation & Maintenance Instructions
42
10. Special notes
10.1 Environmental damage
Only appropriately trained personnel may dismantle and dispose of the unit.
10.2 Dismantling
To dismantle the product, proceed as follows:
ELECTRICAL HAZARD!
When carrying out any decommissioning and dismantling work on the unit, switch off all power supply
connections, ensure they cannot be switched on unintentionally and verify that they have been disconnected.
Earth and short-circuit them, and cover or otherwise isolate any neighboring live parts. Failure to do so may
lead to serious injuries or death.
HIGH PRESSURE HAZARD.
When carrying out any unit decommissioning and dismantling work, close off and empty all the connection
pipes until the pressure is the same as the ambient air pressure. Failure to do so may lead to injury.
Make sure that the hydraulic circuit has been switched off.
Close all hydraulic shut-off valves.
Disconnect all connections, making sure at the same time, that no operating materials escape, such as oil,
refrigerant and water-glycol mixture.
Loosen the connection to the base.
PERSONAL INJURY!
Secure the unit against slipping.
The unit is ready for transporting.
It is important that all transport information is observed .
10.3 Disposal
A specialist company with the appropriate competence must dispose of the unit and individual components.
This technical services department must ensure that:
–
the components are separated according to material types
–
that the operating materials are sorted and separated according to their properties.
ENVIRONMENTAL DAMAGE.
Dispose of all components and operating materials (such as oil, refrigerant and water-glycol mixture)
