Connecting External Components to the System
2-10
Stratus ftServer V 2404, V 4408, V 6408, and V 6512 Hardware Installation Guide
(R004S)
7. Test the operation of the console server by sending an RSN mail message to the
CAC or your authorized Stratus service representative and asking the CAC or your
authorized Stratus service representative to dial into your server. If the console
server is not working, the CAC or your authorized Stratus service representative
will help you correct the problem.
Connecting the AA-E97700 RSN Internet Console Server to the Internet
Perform the following procedure to install the AA-E97700 RSN Internet console server.
N O T E S
1. The AA-E97700 RSN Internet console server
requires OpenVOS Release 17.1.0 or later.
2. Wear an ESD wrist strap to perform this procedure.
1. Connect the RS-232 cable (RJ-45) from serial port 1 on the RSN Internet console
server to the COM 1 port (top port) on the rear of the system chassis (numbers
1
,
2
, and
5
). Tighten the connector screws.
N O T E
This is not a required connection. The CAC uses it as a
manual connection from the PC console if a Telnet
connection is not available.
