Safety Notices
1-12
Stratus ftServer V 2302, V 4304, and V 6308 Systems: Site Planning Guide
(R624)
W A R N I N G
!
Do not use or store this product in a corrosive
environment.
Avoid using or storing this product in an environment
which may contain corrosive gases. Such gases include,
but are not limited to, sulfur dioxide, hydrogen sulfide,
nitrogen dioxide, chlorine, ammonia or ozone.
Avoid installing this product in a dusty environment or one
that may contain corrosive materials such as sodium
chloride or sulfur.
Avoid installing this product in an environment which may
contain excessive metal flakes or conductive particles in
the air.
Such environments may cause corrosion or short circuits
within this product, resulting in not only damage to this
product, but also fire.
If there are any concerns regarding the environment at the
planned site of installation or storage, please contact your
CAC.
W A R N I N G
!
When installing a system or CRU, always connect the
power cord first, before adding communications cables.
The power cord contains the protective earth connection;
it should be connected first and disconnected last, to
maintain a grounded chassis.
Before attempting to remove a CRU from the system
chassis, make sure to power off the CRU, disconnect
communications cables, and then disconnect the power
cord.
Never connect a power cord to a CRU when it is not
located within the system chassis.