Stratus ftserver 3300, Site Planning Manual

Page: 36 / 138

AC Power Service Requirements
4-4 Stratus ftServer 3300, 5600, and 6600: Site Planning Guide (R553)
Use the following worksheets to determine AC power requirements for the site.
•
In Table 4-5 , determine the power requirements at the A-side power source.
•
In Table 4-6 , determine the power requirements at the B-side power source.
•
In Table 4-7 , determine the power requirements for components outside of the
cabinet. These components can share a power source with the A-side or B-side
components.
The power service must be properly wired and grounded according to local standards
and regulations. See
Appendix C for electrical circuit and wiring information.
To determine power receptacle requirements
1. In the Quantity column, write the number of each type of component.
2. Multiply the entry in the Quantity column by the number in the @ Power (Watts)
column, and enter the result in the AC Power (Extended) column.
3. Add the values in the AC Power (Extended) column, and enter the sum on the
bottom line. This value indicates the maximum power requirement for each power
source.
Table 4-5. Worksheet for Determining A-Side Power Requirements
System Component Quantity
@ Power
(Watts) AC Power
(Extended)
ftServer 6600 system x 1300 =
ftServer 5600 system x 650 =
ftServer 3300 system x 500 =
D540 storage enclosure x 300 =
V128 1U LCD unit x 21 =
KVM switch x 20 =
T521 and T522 tape drive
enclosure x 500
TOTAL A-SIDE POWER REQUIREMENTS