Stratus ftServer 2510, Site Planning Manual

Page: 24 / 104

Safety Notices
1-12 Stratus ftServer 2510, 4410, and 6210 Systems: Site Planning Guide (R627)
W A R N I N G
!
If you replace the modem cable supplied by Stratus,
use a cable with a gauge of at least 26 AWG to prevent
fire.
W A R N I N G
!
To avoid fire, electric shock, and equipment
breakdown, prevent water or foreign objects from
getting into the equipment. Do not let water or foreign
objects, such as pins or paper clips, enter the
equipment.
W A R N I N G
!
To prevent fire or current leakage, do not plug the
power cord into a nonconforming outlet. Use a power
outlet with appropriate voltage and power type, as
specified in this guide.
W A R N I N G
!
Do not install the equipment where you may need an
extension cord. Use of an extension cord that does
not meet the power specifications introduces a risk of
overheating that could lead to a fire.
W A R N I N G
!
Disconnect the power cords from the server or power
source before you install or relocate the equipment.
All voltage is removed only when the power cords are
disconnected.
W A R N I N G
!
Do not install or store the equipment in an unsuitable
place. Install or store the equipment in a place that
meets the requirements specified in this guide. Avoid
the following conditions to avoid the risk of fire:
• Dust
• High humidity, such as a place near a boiler