Stratus ftServer 2500, Site Planning Manual, Page: 99 / 106

Standards Compliance C-1
Appendix C
Standards Compliance
C-
For compliance information, see the following:

“Electronic Interference, Immunity, Safety, and Noise Level Standards
Compliance” on page C-1

“Toxic and Hazardous Substances and Elements Disclosure” on page C-4
Electronic Interference, Immunity, Safety, and Noise Level
Standards Compliance
All ftServer systems comply with the electromagnetic interference (EMI), immunity,
safety, and noise regulations listed in
Table C-1 . All necessary agency labels are on the
system.
N O T E S
1. This system must be configured with the components
listed and described in the product configuration
specifications. Deviations from this list of components
will void agency certification.
2. You must install all wiring, including power and
communications cables, in compliance with local and
national electrical code (in the United States, national
electrical code NFPA 70). In addition, you must use
shielded communications cables to remain in
compliance with Federal Communications
Commission (FCC) and other international
Electromagnetic compatibility (EMC) regulations.
3. All EMC emissions compliance tests are performed at
a third-party certified test laboratory.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction