Stratus ftServer 2500, Site Planning Manual, Page: 25 / 106

Safety Notices
Site Planning for ftServer 2500, 4400, and 6200 Systems 1-13
W A R N I N G
!
Do not install the equipment where you may need an
extension cord. Use of an extension cord that does
not meet the power specifications introduces a risk of
overheating that could lead to a fire.
W A R N I N G
!
Disconnect the power cords from the server or power
source before you install or relocate the equipment.
All voltage is removed only when the power cords are
disconnected.
W A R N I N G
!
Do not install or store the equipment in an unsuitable
place. Install or store the equipment in a place that
meets the requirements specified in this guide. Avoid
the following conditions to avoid the risk of fire:
• Dust
• High humidity, such as a place near a boiler
• Direct sunlight
• Instability, such as places not stabilized against earthquakes
W A R N I N G
!
Do not use or store this product in a corrosive
environment.
Avoid using or storing this product in an environment
which may contain corrosive gases. Such gases
include, but are not limited to, sulfur dioxide,
hydrogen sulfide, nitrogen dioxide, chlorine,
ammonia or ozone.
Avoid installing this product in a dusty environment
or one that may contain corrosive materials such as
sodium chloride or sulfur.
Avoid installing this product in an environment which
may contain excessive metal flakes or conductive
particles in the air.