5
Figure 1-4 Stand Position 2 FOV
Placing the Barcode Symbol
1.
Extract the plunger (Figure 1-5) and move the top plate up or down to stand position 1 or 2, and then
insert the plunger into the hole of that position (Default is stand position 1).
2.
Loosen the knob to move down the bottom plate to make enough room for placing the barcode item
between top plate and bottom plate.
3.
Place barcode item on the surface of bottom plate, make sure the barcode symbol faces the top plate.
4.
Move the bottom plate up once it reaches the top plate.
5.
Adjust the barcode position to ensure it is in the center of the FOV.
6.
Tighten the knob to make it ready for verifying.