19
Figure 3-4
Factory Reset
1.
Go to the
Tools
pull down menu, select
Factory Reset
, the
Factory Reset
window is displayed (Figure 3-5).
2.
Click Yes button to perform factory reset that will fully restore the factory parameter settings.
Figure 3-5
Calibration Check
1.
Go to the
Tools
pull down menu, select
Calibration Check
, the
Calibration Check
window is displayed
(Figure 3-6).
2.
Click Start button to start the calibration check. If the calibration check continues to be failed after several
attempts, contact Stratix Customer Support at 1-800-883-8300 to arrange the return of your verifier for
recalibration.