Gas Strut
Strut Bracket
Gas Strut
Strut Bracket
Nut
Pull Cord Latch
Pull Cord
Door Shroud
Wall Channel
10x16 self-drilling screw
Wall Channel
Door Shroud
Rear Flashing
10x16 wafer-
head tek screw
Hinge
Rear Flashing
Fit the Gas Strut into the Strut Bracket. Fasten in place with
the supplied nut.
Figure 4.17
Close the Roof. From inside the shed, fit the Pull Cord over
the Pull Cord Latch.
Figure 4.18
Fit the Door Shroud into the Bottom Wall Channel. Fasten in
Place with four 10x16 self-drilling screws.
Figure 4.16
Figure 4.15
Fasten three 10x16 wafer-head tek screws through the Hinge
and into the Rear Flashing at both ends.
