background image

BR

OC

G

N

I

«

 SCAN THIS QR CODE TO FIND A STRATCO NEAR YOU

All brands and logos/images accompanied by ® or ™ are trade marks of Stratco (Australia) Pty Limited.   ® Copyright December 2020

(407) 915-7442 

stratcousa.com

MAINTENANCE

Regular maintenance is essential to maintain the good looks of all Stratco steel and aluminum products and to 
ensure you receive the maximum lifespan possible. Washing with clean water must be frequent enough to prevent 
the accumulation of dust, salts, and pollutants that may reduce the life of the product. Stratco steel and aluminum 
products that are regularly washed by rain require minimal maintenance. No Stratco steel or aluminum structure 
or materials are recommended for use over, or in close proximity, to swimming pools or spas. No material that 
retains water (such as dirt or paving sand) should be placed against the columns. Care must be taken when 
determining the location of Stratco steel and aluminum products so that they are not placed in close contact 
with sources of pollution or environmental factors that could affect the life of the steel or aluminum. Refer to the 

‘Selection, Use and Maintenance’ brochure for more information.

Summary of Contents for Fence Sanctuary Ezi-Slat Fencing











Reviews:

Related manuals for Fence Sanctuary Ezi-Slat Fencing