Accessories and Utilities
Start-Up Kit
The printer is supplied with a start-up kit, which includes tools and accessories. These tools and
accessories should be available during printer installation and operation.
Exhaust Adapter
An exhaust adapter is supplied with the printer. When attached to the back of the printer and
connected to an external ventilation fan with a duct, air expelled from the printer is discharged directly
outdoors, as shown in the figure below.
Required Suction at the Exhaust Adapter
Duct Diameter
Minimum
Maximum
4 in (100 mm)
212 cfm (6 m
3
/min)
269 cfm (7.6 m
3
/min)
Figure 8 Printer exhaust system
Objet1000 Plus
Accessories and Utilities
18