Advanced Settings
4-20
Keeping the Printer in Idle Mode
4-24
Shutting Down the Printer
4-25
Maintaining the Printer
4-28
Routine Maintenance Schedule
4-28
Maintenance Counters
4-29
UV Lamp Check
4-31
Pattern Test
4-31
Backing up the Printer Configuration
4-34
Improving Print Quality
4-34
Cleaning the Print Heads, Roller and Wiper
4-35
Cleaning the Roller Waste Collector and Inspecting the Roller Scraper 4-38
Replacing the Roller Scraper
4-41
Aligning the Print Heads
4-44
Cleaning the Print-Head Splash Shield
4-49
Optimizing (Calibrating) Print Heads
4-51
Replacing Print Heads
4-59
Testing and Calibrating the UV Lamps
4-69
Calibrating the Load Cells
4-76
Replacing the Waste-Pump Tubes
4-78
Replacing the Material Filters
4-82
Replacing the Odor Filter
4-85
Replacing the UV Lamps
4-85
Dynamic Nozzle Test
4-91
Built-in Tests
4-92
Replacing the Waste Container
4-97
Cleaning the Exterior Panels
4-100
Cleaning the UV Screen
4-100
5 Handling Printed Models
Removing Models After Printing
5-2
Removing the Support Material
5-2
Post-Printing Treatment for Models Made with VeroClear
5-5
Photo-Bleaching Instructions
5-5
Storing Models
5-6
'2& 5HY $
LY
